User guide

PTP 800 Series User Guide Using recovery mode
phn-2513_004v000 (Oct 2012)
7-73
Figure 201 Recovery Options page
Table 262 Recovery options
Option Recovery task
Upgrade Software
Image
Upgrading software image on page 7-74.
Management Mode
After Reset IP
This option selects the management mode that will be
configured following reset of the IP and Ethernet
configuration, or following erasure of all configuration data.
Reset IP & Ethernet
Configuration back to
factory defaults
Resetting IP and Ethernet configuration to factory defaults
on page 7-75.
Erase Configuration Erasing configuration on page 7-76.
Zeroize Critical
Security Parameters
Zeroizing security parameters on page 7-76.
Reboot This option is used to reboot the CMU after resetting
configuration or parameters, as described in the above
recovery tasks.