User guide

Using recovery mode Chapter 7: Operation
7-72
phn-2513_004v000 (Oct 2012)
Selecting recovery option
Before starting this task, check that the CMU is in recovery mode. When the CMU Modem
LED (Table 5) blinks red, the CMU is in recovery mode.
To select the CMU recovery option, proceed as follows:
1
Start the web browser.
2
Type IP address 169.254.1.1 into the address bar and press ENTER.
The Recovery Mode Warning page is displayed (Figure 200).
3
Click anywhere on the Recovery Mode Warning page.
The Recovery Options page is displayed (Figure 201).
4
Select the required recovery option and perform the recovery task (Table 262).
Figure 200 Recovery Mode Warning page