User guide

Managing security Chapter 7: Operation
7-52
phn-2513_004v000 (Oct 2012)
Displaying login information
To display details of the most recent successful login, and the most recent unsuccessful
login attempt, for each user of the web-based interface, select menu option Management,
Web, Login Information. The Login Information page is displayed (Figure 191).
Figure 191 Login Information page
Disabling AES encryption
Perform this task to disable the encryption of data transmitted over the PTP 800 bridge.
For more information on AES encryption, see AES license on page 1-60
This procedure must be repeated at both ends of the link.
If AES encryption is disabled at one end of the link, it must also be disabled at the other
end of the link, otherwise the link will not work.
Unprotected link
To disable AES encryption for an unprotected link, proceed as follows:
1
Select menu option Configuration. The System Configuration page is displayed
(Figure 172).
2
Set the Encryption Algorithm attribute to ‘None’.
3
Select Submit Updated System Configuration. The Configuration Change
Reboot dialog is displayed.