User guide

Managing alarms and events Chapter 7: Operation
7-30
phn-2513_004v000 (Oct 2012)
SNMP Trap name Description Cause and action
dataPortEthernetSpe
edStatusTrap
In a 1+1 Hot Standby
configuration this indicates that
the Ethernet Speed of the Data
Port is below that of its
neighbor.
This is probably due to a
configuration error.
managementPortEthe
rnetSpeedStatusTrap
In a 1+1 Hot Standby
configuration, this indicates that
attribute indicates that the
Ethernet Speed of the
Management Port is below that
of its neighbor.
This is probably due to a
configuration error.
protectionInterfaceSt
atusTrap
In a 1+1 Hot Standby
configuration, information is
shared between neighbor CMUs
over the Protection Interface.
This reports whether the
neighbor CMU is successfully
responding, physically
disconnected or whether it is
physically connected but not
responding, for example
powered down.
This may indicate that the
other unit is faulty, not
available or the protection
interface is not installed, not
working or disconnected.