User guide

Web-based management Chapter 7: Operation
7-14
phn-2513_004v000 (Oct 2012)
Example
Each unit in a 1+1 Hot Standby link may be fully identified by the siteName, the
primarySecondaryMode and the linkName. For example, suppose that these variables are
set to:
• siteName = ‘Site1’, ‘Site2’, ‘Site3’ and ‘Site4’
• primarySecondaryMode = ‘Primary’ or ‘Secondary’
• linkName = ‘Rack RBW4’
For each unit, use the Webpage Properties page to enter the relevant Browser Title
variables (Figure 185). As a result, the four units in the 1+1 Hot Standby are identified in
the browser tabs, and the currently selected unit is identified in the browser title bar
(Figure 186).
Figure 186 Identifying units in the web browser title bar and tabs
Logging out
To maintain security, always log out at the end of a session by selecting menu option
Logout.
Alternatively, the unit will log out automatically, but this depends upon the setting of Auto
Logout Period in the Webpage Properties page (Figure 134).