User guide

PTP 800 Series User Guide Web-based management
phn-2513_004v000 (Oct 2012)
7-11
Table 254 Wireless Link Status attribute values
Value Meaning
Up The point-to-point link is established
Searching A red background with status text “searching” indicates that
the link is not established and no signal has yet been
detected from the PTP 800 at the other end of the link. This
is a valid status value; if the link remains in this state it
implies that the remote PTP 800 has not been detected.
Other values A red background with status text (registering, acquiring,
initialising) indicates that the link is not yet established.
These are normal stages in the establishment of an
operational link. If the link remains in any state for a long
period of time it implies a problem with the PTP 800.
Table 255 Transmit Modulation Selection Detail attribute values
Value Meaning
Acquiring Link The wireless link is not established.
Fixed The Transmit Modulation Selection is set to ‘Fixed’.
Installation ACM Highest The highest transmit modulation that can be used for
the installation settings.
Installation ACM Lowest The lowest transmit modulation that can be used for
the installation settings.
User ACM Highest The transmit modulation is the highest configured by
the user.
User ACM Lowest The transmit modulation is the lowest configured by
the user.
Limited by wireless channel
conditions
The transmit modulation is limited by the wireless
conditions.