User guide

PTP 800 Series User Guide Task 13: Reviewing configuration and performance
phn-2513_004v000 (Oct 2012)
6-109
Attribute Meaning
Short Power Cycle for
Recovery
Read only. This attribute is set in the Installation wizard
(Table 232).
Radio License
These attributes are read only, as they are set in the
Installation wizard (Table 233).
Wireless
Maximum Transmit
Power
The maximum transmit power that the local wireless unit is
permitted to use to sustain a link.
EIRP The actual EIRP in dBm.
Max Mod Mode The maximum modulation mode the radio can use when
ACM is enabled. The valid range is dependant on the
region, license and Tx Max Power. This control is
only visible for certain regions when Radio
License Modulation Selection is set to ‘Adaptive’.
Min Mod Mode The minimum modulation mode the radio can use when
ACM is enabled. The valid range is dependant on the
region, license and Tx Max Power. This control is
only visible for certain regions when Radio
License Modulation Selection is set to ‘Adaptive’.
Encryption Algorithm This is set in Configuring AES encryption on page 6-29.
Encryption Key This is set in Configuring AES encryption on page 6-29.
Automatic Transmitter
Power Control
Enable or disable ATPC.
In regions and bands where ATPC is a regulatory
requirement, for example 18 GHz Europe, this cannot be
disabled.