User guide

Task 8: Setting up SNMP agent Chapter 6: Configuration and alignment
6-84
phn-2513_004v000 (Oct 2012)
Attribute Meaning
SNMP Trap IP
Address 1
The IP address of the first SNMP server (trap receiver). This is
normally the network management system, but it may be a
separate trap receiver.
A value of zeros disables logging on the first SNMP server.
SNMP Trap Port
Number 1
The server 1 port at which SNMP traps are received.
SNMP Trap User
Account 1
The user name (and associated protocols) to use when sending
SNMP traps to server 1.
SNMP Trap IP
Address 2
The IP address of the second SNMP server (trap receiver). This
is normally the network management system, but it may be a
separate trap receiver.
A value of zeros disables logging on the second SNMP server.
SNMP Trap Port
Number 2
The server 2 port at which SNMP traps are received.
SNMP Trap User
Account 2
The user name (and associated protocols) to use when sending
SNMP traps to server 2.
Confirming SNMP configuration (for SNMPv3)
When the Confirm SNMP Configuration page (Figure 158) is displayed, review the settings
and select either Back or Confirm SNMP Configuration and Reboot. When the settings
are confirmed, the unit reboots.