User guide

PTP 800 Series User Guide Task 8: Setting up SNMP agent
phn-2513_004v000 (Oct 2012)
6-79
Attribute Meaning
SNMP Port
Number
The port that the SNMP agent monitors to detect commands
from a management system.
Step 2: SNMP MIB-II system objects
The Step 2: SNMP MIB-II System Objects page is displayed (Figure 154). Update the
attributes (Table 236), then select Next.
Figure 154 Step 2: SNMP MIB-II System Objects page
Table 236 Step 2: SNMP MIB-II System Objects attributes
Attribute Meaning
Sys Contact The contact name for this managed node, with contact details.
Sys Name An administratively-assigned name for this managed node. By
convention, this is the fully-qualified domain name.
Sys Location The physical location of this node.
Step 3: SNMP user policy configuration (for SNMPv3)
If the chosen SNMP Security Mode is ‘Web-based’, the Step 3: SNMP User Policy
Configuration page is displayed (Figure 155). Update the web-based security profile
attributes (Table 237): these determine which authentication and privacy protocols are
required for SNMP users with roles ‘System Administrator’ and ‘Read only’. Select Next.