User guide

PTP 800 Series User Guide Task 7: Configuring wireless interface
phn-2513_004v000 (Oct 2012)
6-71
Table 233 Step 2: Radio License Configuration attributes
Attribute Meaning
Radio License
Identifier
An identifier for the radio license, for example a certificate
number, if one was provided by the licensing authority.
This attribute is for reference only.
Radio License Band The licensed band (GHz). When an RFU is attached, this
attribute is set automatically.
Radio License Region The license region.
Radio License
Bandwidth
The licensed bandwidth (MHz).
This attribute is only displayed when Radio License Region
is set to FCC or Canada.
Radio License Channel
Separation
The licensed spacing between channels (MHz).
This attribute is only displayed when Radio License Region
is set to ETSI or Brazil.
Radio License
Modulation Selection
‘Fixed Modulation’ is the default.
‘Adaptive Modulation’ may be available, if permitted by the
license.
Radio License Mod
Mode
The licensed modulation mode.
This attribute is only displayed when Radio License
Modulation Selection is set to ‘Fixed Modulation’.
Radio License Ref.
Modulation
Reference modulation mode specified by the license. This
control is only visible for certain regions when Radio
License Modulation Selection is set to ‘Adaptive’.
Radio License Max
Mod Mode
The highest modulation mode allowed by the license. This
control is only visible for certain regions when Radio
License Modulation Selection is set to ‘Adaptive’.
Radio License Min
Mod Mode
Select the lowest modulation mode allowed by the license.
This control is only visible for certain regions when Radio
License Modulation Selection is set to ‘Adaptive’.
Radio License Max
EIRP
The maximum permitted strength of the radio signal in dBm
EIRP.
Radio License Tx
Frequency
The licensed transmit frequency (MHz).
Radio License Rx
Frequency
The licensed receive frequency (MHz).