User guide

PTP 800 Series User Guide Task 6: Configuring protection
phn-2513_004v000 (Oct 2012)
6-53
Task 6: Configuring protection
If the PTP 800 link is to be unprotected (1+0 or 2+0), perform Configuring unprotected
links on page 6-53. If the PTP 800 link is to be protected using the 1+1 Hot Standby
feature, perform Configuring 1+1 Hot Standby links on page 6-54.
To upgrade an existing unprotected link to use the 1+1 Hot Standby, perform Upgrading
an unprotected link to 1+1 Hot Standby on page 6-61.
Configuring unprotected links
To ensure that protection is disabled, select menu option System, Configuration,
Protection. When the Protection Configuration page is displayed (Figure 136), confirm
that the Protection attribute is set to ‘Disabled’.
Figure 136 Protection Configuration page (protection disabled)
The Status page shows details of the PTP 800 at the other end of the link with no
protection information.