User guide

PTP 800 Series User Guide Task 2: Configuring IP and Ethernet interfaces
phn-2513_004v000 (Oct 2012)
6-19
Figure 117 Confirm LAN Configuration
Reconnecting to the management PC
If the IP Address, Subnet Mask and Gateway IP Address of the unit have been updated to
meet network requirements, then reconfigure the local management PC to use an IP
address that is valid for the network. Refer to Configuring the management PC on page 6-
3.
When the IP address of the unit has been reconfigured, log in using the new IP address.
Refer to Logging into the web interface on page 6-6.