User guide

PTP 800 Series User Guide Task 2: Configuring IP and Ethernet interfaces
phn-2513_004v000 (Oct 2012)
6-17
Attribute Meaning
Data Port Copper Auto
Neg Advertisement
Select the data rate that the auto-negotiation mechanism
will advertise as available. Use the same setting for both
ends of the link.
Ensure that this attribute has the same setting in the
CMU and in connected network equipment. If they are
not consistent, then a duplex mismatch will occur,
resulting in greatly reduced data capacity.
Only select a data rate that is within the capability of
connected network equipment, otherwise loss of service
may occur.