User guide

PTP 800 Series User Guide Network management specifications

phn-2513_004v000 (Oct 2012)

4-79

Object identifier Object name

.1.3.6.1.2.1.17.1.2 dot1dBaseNumPorts

.1.3.6.1.2.1.17.1.3 dot1dBaseType

.1.3.6.1.2.1.17.4.1.1 dot1dBasePort

.1.3.6.1.2.1.17.4.1.2 dot1dBasePortIfIndex

.1.3.6.1.2.1.17.4.1.3 dot1dBasePortCircuit

.1.3.6.1.2.1.17.4.1.4 dot1dBasePortDelayExceededDiscards

.1.3.6.1.2.1.17.4.1.5 dot1dBasePortMtuExceededDiscards

Interfaces

The standard interface MIB for PTP 800 always reports five interfaces as follows:

Table 203 Identification of interfaces

ifIndex ifDescr ifType ifOperStatus

1 wireless interface propWirelessP2P(157) up | down

2 ethernet data interface ethernetCsmacd(6) up | down

3 ethernet management interface ethernetCsmacd(6) up | down

4 telecom channel A interface ds1(18) notPresent

5 telecom channel B interface ds1(18) notPresent

PTP 800 does not support telecom channels. These interfaces are included for

consistency with other Cambium PTP products.

Counters

The tables below demonstrate the relationship between counter objects in the standard

MIB and attributes on the Detailed Counters page of the web-based management

interface:

Table 204 Counters for the wireless interface

MIB object Detailed counter in the web-based interface

ifInUcastPkts WirelessDataRxFrames + WirelessManagementRxFrames

ifInDiscards Sum of WirelessDataRxFramesDiscardedQ