User guide

PTP 800 Series User Guide Syslog message formats
phn-2513_004v000 (Oct 2012)
4-75
Facility Severity Identifier Message content
local6(22) warning(4) rfu_power_button_pressed "The IRFU Power button has been
pressed"
local6(22) warning(4) rfu_switch_firmware_banks "Switching RFU firmware banks
following software upgrade"
security(4) warning(4) sec_zeroize "Critical Security Parameters (CSPs)
zeroized" SC
local6(22) warning(4) snmpv3_asn1 "ASN.1 parse error" SC
security(4) warning(4) snmpv3_auth "Authentication failure" SC
local6(22) warning(4) snmpv3_decryption "Decryption failure" SC
local6(22) warning(4) snmpv3_engine_id "Unknown engine ID" SC
local6(22) warning(4) snmpv3_sec_level "Unknown security level" SC
kernel(0) warning(4) sys_reboot "System Reboot, reason=" reset-reason
SC
security(4) warning(4) sys_software
_upgrade
"Software upgraded from " software-
version " to " software-version SC
software-version = "800-" digit digit "-"
digit digit ("" | "-FIPS" | "-UCAPL") SC
local6(22) info(6) system_counters_reset "System Counters Reset" SC
local6(22) info(6) system_statistics_reset "System Statistics Reset" SC
local6(22) warning(4) telnet_idle "Telnet user=" user-name SC SP
"from=" IP-address SC SP "port=" port-
number SC
local6(22) info(6) telnet_login
local6(22) warning(4) telnet_login_failed
local6(22) info(6) telnet_logout
local6(22) info(6) tftp_complete "TFTP software upgrade finished" SC
local6(22) info(6) tftp_failure "TFTP software upgrade failed,
reason=" reason SC
local6(22) info(6) tftp_start "TFTP software upgrade started" SC
NTP(12) warning(4) time_auth_failed "SNTP authentication failed at IP-
address=" IP-address SC SP "port-
number=" port SC