User guide

PTP 800 Series User Guide Wireless specifications
phn-2513_004v000 (Oct 2012)
4-19
Wireless specifications
This section contains specifications of the PTP 800 wireless interface, including RF bands,
channel width and link loss.
General wireless specifications
The PTP 800 conforms to the general wireless specifications listed in Table 97.
Table 97 General wireless specifications
Feature Specification
Channel separation (ETSI) 7, 13.75, 14, 27.5, 28, 29.65, 30, 40, 55, 56 or 60
MHz.
Channel bandwidth (FCC/IC) 10, 20, 25, 30, 40, 50 or 80 MHz.
Modulation QPSK, 8PSK, 16QAM, 32QAM, 64QAM, 128QAM
and 256QAM. Fixed or adaptive modulation.
Duplex scheme Frequency division duplex.
Capacity options Basic capacity is 10 Mbps in each link direction.
May be upgraded via software license key to one of
the following capacity levels: 20, 30, 40, 50, 100,
150, 200, 300 Mbps, Unlimited.
Latency Ultra-low latency, <115 us @ 368 Mbps with 64
bytes frame.
Encryption FIPS-197 128/256 bit AES encryption.
ATPC Supported in all configurations.