User guide

PTP 800 Series User Guide Ordering components
phn-2513_004v000 (Oct 2012)
2-97
Item Cambium part number and notes
SFP Gig-E fiber pluggable module
If a fiber interface between the CMU and
Ethernet switch is required, then two SFP
modules are needed.
Either: ‘SFP SX Gig-E Optical Pluggable
Module - 850 nm’. Cambium part number
01010430001.
Or: ‘SFP LX Gig-E Optical Pluggable Module -
1310 nm’. Cambium part number
01010431001.
Fiber-Y kit
Optional customer network connection for a
1+1 Hot Standby link with out-of-band
management.
Quantity per link: 2 (with out-of-band
management).
‘1+1 Optical-Y Splitter Kit per end (inc SFP
Modules - 850nm)’. Cambium part number
WB3806.
Kit contains:
Two Optical-Y cable assemblies (one
illustrated), one for transmit and one for
receive.
Two 1000-BASE-SX SFP modules.
Ordering capacity upgrades
Purchasing a capacity upgrade will not necessarily lead to an increase in data capacity, as
capacity also depends on channel bandwidth and modulation mode. For more
information, see Capacity, transmit power and sensitivity on page 4-22.
Select either a single-step capacity upgrade from Table 73, or one or more step-by-step
capacity upgrades from Table 74.