User guide

Ordering components Chapter 2: Planning considerations
2-96
phn-2513_004v000 (Oct 2012)
Ordering network connection components
Select network connection components from Table 71 (copper interfaces) or Table 72
(fiber interfaces).
Table 71 Copper network cables and connectors
Item Cambium part number and notes
Screened Cat5e cable To minimise radiated emissions, use screened
Cat5e cable for all copper connections from
the CMU Ethernet ports (Data or
Management) to any network switch.
RJ45 connectors Two required per Cat5e cable.
Out-of-band protection splitter
Quantity per link: 2 (with out-of-band
management).
Only required for 1+1 links with out-of-band
management.
‘1+1 Out-of-Band Splitter Kit’. Cambium part
number WB3807.
Protection cable Quantity per link: 2 (with in-band
management).
Only required for 1+1 links with in-band
management.
For specification, see Protection cable on page
4-17.
Table 72 Fiber network cables and connectors
Item Cambium part number and notes
Fiber cable and connectors If a fiber interface between the CMU and
Ethernet switch is required, then fiber cable
and connectors are needed (not supplied by
Cambium).