Programming instructions

71
Software Procedures
5. Click Next.
6. Ensure that the Read manual instructions to complete the
installation check box is selected, and click Finish. The README file
opens.
Installing System Software on the Controller
To perform a full or new install with the Software Installer Tool:
1. Launch the Software Installer Tool.
2. In the Identification Screen, enter the following:
- 3300 ICP IP Address or DNS Name of the controller onto which you
want to install the software
- System Login ID
- System Password
3. Click Configure. The Full Install Source Definition screen appears.
4. Select Perform Full Install. Enter the following information:
- FTP Server IP Address
- FTP Account Name
- FTP Password
5. Click Next to open the Define Full Install Options screen.
6. Select the desired upgrade install options. All four options are selected
by default.
- Backup to create a Backup File
-Install to Install the Software
- Configure to configure the License and Options
-Restore to restore your Database
7. Click Next to launch the License and Option Selection screen.
Time: The system takes approximately 10 minutes to copy the files.
CAUTION: If you have a Universal NSU with a PRI database,
you must convert that database before you begin the install
(see “Converting a PRI Database on a Universal NSU” on
page 76).