Programming instructions

70
3300 ICP Technician’s Handbook
To install the ICP Software Installer Tool:
1. Insert the 3300 ICP software CD-ROM into the Installer PC’s CD drive.
2. Open the Tools folder, then the Software Installer folder.
3. Double-click the Setup.exe file. Follow the prompts to install the Tool.
To launch the ICP Software Installer Tool:
1. On the Start menu, point to Programs, and then click Mitel 3300 ICP
Software Installer.
2. For ICP Software Installer Tool information, refer to its Online Help.
Installing System Software on the FTP Server
To install system software on the FTP server:
1. Insert the 3300 ICP software CD-ROM into the installer PC’s CD drive.
2. Release 7.0 and later: run the Mitel_3300ICP_Installation.exe
program from the Software folder on the software CD-ROM.
Prior to Release 7.0: run the Setup.exe program from the Software
folder on the software CD-ROM.
You will see the Installation Wizard Welcome page.
3. Click Next, read the License Agreement, and click Yes to continue.
4. Choose a location on your local FTP server for the InstallSetup
program to install files (default username and password for the
controller is ftp and @).
- Click Browse to find the location, and then click Next OR
- Click Next to accept the location displayed and continue.
You will see a read-only list of the configurations you have made.
Tip: Ports required by the Software Installer Tool and Audio File Manager:
Prior to Release 7.0 - port 2002 and ports 49500-49549
Release 7.0 and later - port 443.
Tip: Refer to “Requirements for AMC Connection” on page 23 if you wish
to manage software licenses online.
Tip: If you do not see this list, your FTP server is not installed properly.
If the files get installed on the PC’s c: drive, your FTP server is not installed
and you will get a message ‘No FTP Server’. Re-install your FTP server.