Programming instructions

69
Software Procedures
Restore Issue - Music on Hold file size
If you restore a pre-Release 6.0 database, with an embedded music on
hold file larger than 8 MB (for the MX/LX) or 16 MB (for the LX 512 MB),
the file is moved to a temp location and disabled. The following error log is
generated: Embedded System Music On Hold Audio source file size
exceeds allocated space. It has been disabled and placed in a temporary
location: db/temp/system_music_on_hold_tmp.
The relocated file is not backed up and will remain on the hard drive until
a full install is performed of until the file is deleted.
To restore music on hold when it is disabled due to file size:
1. Retrieve the system_music_on_hold_tmp file from db/temp/
2. Reduce the file size.
3. Use the System Audio Files Update form, in the System
Administration Tool, to restore the smaller music on hold audio file.
OR create a new audio file within the size limit.
Software Procedure Requirements:
 Installation/Maintenance PC (see page 7 for requirements)
 IP address of the 3300 ICP
 3300 ICP username and password
 3300 ICP software CD
 Mitel 3300 ICP Software Installer Tool (for a true upgrade)
 3300 ICP Mitel Options Password (see page 11)
 Database backup with voice mail messages (see page 61).
Installing the Software Installer Tool
You can install the Software Installer Tool on the Installation/Maintenance
PC, or on its own PC (see page 7 for PC requirements).
Tip: You need a new password if you have purchased new options.
You do not need a new password to change Configuration Options.
Tip: Assign a static IP address to the PC running the Software Installer Tool.