Programming instructions

3300 ICP Technician’s Handbook

3. Type the location of the database that is being restored, or use the

browse facility.

4. Click Yes if you want to include Hotel/Motel wake up information in the

restore.

5. Prior to Rls 5.1 UR 1:Choose the Dimension Selections (see page 83)

- accept Use Dimension Selections from backup file OR

- click Use Current Dimension Selections if you are restoring the

database after programming new Dimension Selection information.

6. Click Start Restore.

7. Click OK. The system will show an “in progress” message.

8. When the status window shows “complete”, click OK.

9. Reboot the controller (see page 99). When the reboot is complete, the

database is converted, and the system automatically resets (prior to

Release 4.0, another manual reboot was required).

- If you have programmed Dimension Selection, the system reboots

automatically one more time.

Verifying the Restore

Tip: To perform a restore, your current user account on the computer must

have Java Plug-in version 1.4.2_06 or later installed. If you do not have the

correct version of Java installed, it will be automatically installed when you

click Start Restore. The restore will begin after the plug-in is installed.

Tip: While the System Administration Tool is restoring the database, no

other users can access any of the web-based tools, access Visual Voice

Mail, or save changes. To avoid blocking other users, we recommend that

you perform restores outside of business hours.

CAUTION: Do not reset any system components

(Controller, NSU, ASU, DSU, Peripheral Cabinet, and so on)

while executing the following checks.

CAUTION: Rebooting the controller before the Analog Main

Board and Analog Options Board loads can render the

boards inoperable.