Programming instructions

52
3300 ICP Technician’s Handbook
Installing Line Interface Modules
The Line Interface Module (LIM) provides analog operation to the 5220 IP
Phone (Dual Mode), 5224 IP Phone, 5235 IP Phone, 5330 IP Phone, or
5340 IP Phone in the event of an IP connection failure. Follow the
instructions in the Installation Guide that is included in the module package
to install a Line Interface Module. Refer to “Program Emergency Services
for a Line Interface Module” in the System Administration Tool Help.
Programming Phones
To program telephones:
1. Using the System Administration Tool, enter the required
programming and registering information in the applicable forms in the
Devices folder. Refer to the Online Help for details.
2. Program the User Authorization Profile form for the IP device users
if required. Typically, IP Phone and Appliance users are only given
access to the Desktop Tool.
Registering IP Devices from the Telephone
Use this procedure to register IP devices with the 3300 ICP database. The
procedure will program the 3300 ICP database with the MAC address of
the IP device.
Before you begin
• Ensure a Set Registration Access Code and a Set Replacement
Access Code are assigned in the System Options Assignment form.
• Ensure the directory number and device type is programmed in the
Single Line IP Set Configuration form or Multiline IP Set Configuration
form.
Tip: Refer to the System Administration Tool Online Help for
information on programming SpectraLink Wireless Telephones, IP
DECT Wireless Phones, and Symbol NetVision MiNET Phones.
Tip: If you have a large number of new user profiles to add, you can
import new user and device data using the Import functionality in the
User Configuration form in the System Administration Tool.
Tip: Use the System Administration Tool to program all other set features
(for example, Class of Service, Interconnect Restriction, Set Key
Assignments, and Class of Restriction).