Programming instructions

51
Installation
Install Telephones and Peripherals
This section contains information on installing telephone sets, consoles,
and other peripherals.
The 3300 ICP supports a number of IP, DNI, analog and wireless phones,
as well as conference units, programmable key modules, and attendant
consoles. The CX and CXi controllers support IP and analog phones.
If you have a peripheral cabinet with analog/DNIC phones connected to it,
program those telephones using the System Administration Tool.
Installing Telephones, Consoles and Appliances
Refer to each device’s Installation Guide (included in the telephone
package) to install the devices.
Upgrading IP Phone Firmware
• Automatically download firmware from the 3300 controller to the IP
Phones (requires a DHCP server configured with
options 128-133).
• Download firmware by plugging the telephone directly into an Ethernet
port on the 3300 controller. The controller must be running Release
7.0 or later to provide LLDP-compliant firmware to the telephone.
Tip: You cannot use the Group Administration Tool to modify programming
for SUPERSET 400-series telephones.
Tip: Connect a printer to the 5550 IP Console RS-232 port to print hotel
reports. For Release 6.0 and later, PMS provides for a direct IP connection
to the 3300 ICP. See Property Management System in the online help for
details.
Note: If you intend to rely on LLDP VLAN Discovery in the network, you
must first upgrade the 3300 ICP to Release 7.0 or later and upgrade the
IP Phone firmware to version 2.0.0.18 or later.
Note: LLDP-MED non-compliant telephones cannot use LLDP for VLAN
discovery. They must use DHCP VLAN discovery. Non-compliant sets are:
5001, 5005, 5010, 5020 IP Phones, 5140 IP Appliance, 5201, 5205, 5207,
5215 (single mode), 5220 (single mode), 5230 IP Phones, 5240 IP
Appliance, 5485 IP Pager, and 5550 IP Console keypad.