Programming instructions

26
3300 ICP Technician’s Handbook
To automatically select licenses and options for release 6.0 and later:
1. Complete the System IP Configuration form to enable the Primary
and Secondary DNS Servers to establish a connection with the
Application Management Center (AMC) Server (see "Requirements
for AMC Connection" on page 23).
2. Access the License and Option Selection form.
3. Click Change and enter your Application Record ID.
4. Click Retrieve Licenses to query the Application Management Center
(AMC) and retrieve your Purchased Options and Password.
5. Select the appropriate Country variant and Configuration Options.
6. Click Save to commit your changes to the database and to the AMC.
7. Reboot the controller (see page 99).
Setting the Date and Time and Saving the Settings
To set the system date and time:
1. Log into the System Administration Tool (see page 8).
2. In the All forms (alphabetical) list, click Maintenance Commands.
3. Enter writedatetime <year> <month> <day> <day of the week>
<hours> <mins> <seconds> to set the date and time. For example,
writedatetime 2004 4 3 2 12 31 51 (2004 April 3rd Tuesday 12:31:51).
4. Perform a DBMS save using the dbms save maintenance command.
5. Enter the dbms stat command to verify the DBMS save.The system
response is DBMS info: DBMS_INITIALIZED is on.
Programming the Controller Modules
1. Access the Controller Module Configuration form.
2. Highlight the module (slots 1 to 4) and click Change.
Tip: The PC that is running the Software Installer Tool has networking
requirements that must be met to establish a connection with the AMC. Refer
to "Installing the Software Installer Tool" on page 69 for details.
Tip: The DBMS SAVE command will ensure that all future programming
changes are saved. You must perform the DBMS SAVE command before
the programmed internal DHCP server will run (see page 29 for DHCP
programming instructions).