Programming instructions

3300 ICP Technician’s Handbook

2. TCP/IP Source Port on the ICP: The MiSync client will connect to

TCP port 443 (https) on the AMC. If the ICP is behind a firewall, the

firewall must allow TCP connections from the ICP to TCP port 443 on

the AMC.

3. ICP behind an HTTP Proxy Server: The MiSync client uses HTTPS

to communicate with the AMC. The HTTP/1.1 CONNECT method is

the standard used by proxy servers to proxy HTTPS. There should be

no extra configuration work required. See Step 4, “SI Host PC behind

an HTTP Proxy Server“ on page 23.

4. CX/CXi/MXe-Specific WAN Considerations: Program the Internet

Gateway (WAN interface) IP address details (see "CXi/MXe

Requirements for IP Networking" on page 297).