Programming instructions

323
Typical Network Configurations
CXi/MXe Configuration Procedures
Firewall/Port Forwarding
The Port Forward Table form allows external traffic to reach resources on
the internal network and can contain up to 40 entries.
PPTP Remote Access
The PPTP form is used to program the internet gateway as a PPTP (Point
to Point Tunneling Protocol) server for a remote client on the internet.
WAN Settings (Internet Gateway)
The WAN Settings form is used to enable the WAN interface and provide
internet connectivity settings.
• Enable WAN Access
• Select a WAN IP method: Static IP Address, DHCP Client, or PPPoE.
Table 90: Port Forward Table (CXi/MXe only)
Parameter Function/Values
Protocol The WAN interface protocol; UDP or TCP.
Src Start Port The source port at the start of the range.
Src End Port The source port at the end of the range.
Dst IP Address IP Address of the destination device.
Dst Start Port Destination port at the start of the range.
Dst End Port Destination port at the end of the range.
Table 91: PPTP (CXi/MXe only)
User Name The username that the server uses to authenticate the
remote client.
Password Password that the server uses to authenticate the
remote client.
Client IP Address Address that the remote PPTP client uses on the LAN.
PPTP Access Set to “Enable” to enable PPTP remote access.
Tip: Refer to the Network Configuration chapter in the Engineering
Guidelines.