Programming instructions

318
3300 ICP Technician’s Handbook
Configuration 1: One DHCP Server per VLAN
Table 86 below shows the DHCP settings programmed for this
configuration.
Figure 71: One DHCP Server per VLAN - Example
Table 86: DHCP Settings Example (Configuration 1)
Setting
DHCP Server on VLAN 1
(IP: 10.10.10.2)
Scope 1
Internal DHCP Server on
Controller
Scope 1
DHCP 10.10.10.10 to 10.10.10.100 20.20.20.10 to 20.20.20.100
Subnet 255.255.255.0 255.255.255.0
Opt. 03 10.10.10.251 20.20.20.251
Opt 125 or 43
(Rel. 7.0>)
id:ipphone.mitel.com;sw_tftp=192.168.1.2;call_srv=192.168.1.
2;vlan=1;l2p=6;dscp=46;
Opt. 128* 20.20.20.1 20.20.20.1
Opt. 129* 20.20.20.1 20.20.20.1
Opt. 130* MITEL IP PHONE MITEL IP PHONE
Opt. 132* 2 —
Opt. 133* 6 —
* Required on Release 7.0 systems to allow IP sets to upgrade to firmware that supports
options 125 and 43.