Programming instructions

310
3300 ICP Technician’s Handbook
Configuring a Windows 2000 or Windows 2003 DHCP
Server (Rls 7.0 and later)
Neither Windows 2000 nor Windows 2003 support DHCP Options 124/125.
Options 60/43 must be used instead.
To create Options 60/43 on a Windows 2000 (or Windows 2003)
DHCP server:
1. Upgrade the 3300 ICP to Release 7.0.
2. Upgrade the IP Phone firmware. (See page 51).
3. Start DHCP Manager.
4. In the console tree, click the applicable DHCP server branch.
5. Right-click the server, then click Define Vendor Classes followed by Add.
6. In the New Class dialog box, type “Mitel Vendor Class” or other name
for the new option.
7. Type “ipphone.mitel.com” in the right side of the text box under ASCII.
Note: Options 128-133 used in previous ICP releases are required to
provide backward compatibility with IP sets that have yet to be upgraded
with firmware (2.0.0.18 or later) that supports options 124/125 or 60/43.
After the upgrade, the old options may be removed to prevent future
conflicts with standard use or other vendors’ use of these options.
Note: If you intend to rely on LLDP VLAN Discovery in the network, you
must first upgrade the 3300 ICP to Release 7.0 or later and upgrade the
IP Phone firmware to version 2.0.0.18 or later.
Note: LLDP-MED non-compliant telephones cannot use LLDP for VLAN
discovery. They must use DHCP VLAN discovery. Non-compliant sets are:
5001, 5005, 5010, 5020 IP Phones, 5140 IP Appliance, 5201, 5205, 5207,
5215 (single mode), 5220 (single mode), 5230 IP Phones, 5240 IP
Appliance, 5485 IP Pager, and 5550 IP Console keypad.