Programming instructions

302
3300 ICP Technician’s Handbook
Table 79: Mitel DHCP Server Options
Option ID Name Type
Value
(notes, example)
3 Router IP address IP Address. 192.168.1.3
6 DNS server IP
address
IP Address Required for the 5230 IP
Appliance.
125
(Applies to
Rel. 7.0 and
later systems.
Option 43 can
also be used.)
Vendor Specific
Information
ASCII String Default is
“id:ipphone.mitel.com;sw
_tftp=192.168.1.2;call_sr
v=192.168.1.2;
vlan=1;l2p=6;dscp=46”
44 NetBIOS name IP Address Server IP address.
Required for the 5230 IP
Appliance.
66 TFTP Server Name ASCII String Required when using an
external DHCP Server.
Boot Server Host Name
(same as RTC IP
address, for E2T only).
67 bootfile ASCII String Boot file name (for E2T
only).
128
(See note)
TFTP Server
(usually the
controller RTC)
IP Address IP address of the TFTP
server (192.168.1.2)
129
(See note)
RTC IP Address for
this controller
IP Address IP address (192.168.1.2)
Enter up to four IP
addresses of remote
fail-over RTCs. Separate
entries with a comma and
a space.
130
(See note)
IP Phone DHCP
server
discrimination string.
ASCII String MITEL IP PHONE
131
(See note)
IP Phone Analyzer
PC
IP Address
(Page 1 of 2)