Programming instructions

21
Installation
- loosely enough that the frame mounting bracket can be dropped
into position, resting on the screw thread (see Figure 7).
3. Position the MXe on the frame, resting the MXe mounting brackets on
the frame mounting screw thread.
- The MXe will rest on those screws while the remaining screws are
installed.
4. Install two more screws on each side of the frame, in the 3rd and 6th
hole positions.
5. Tighten all six of the mounting screws.
CAUTION: Remove the MXe from the rack in reverse order.
Loosen the bottom screws before the other screws are
removed.
Never turn the bottom screws while the rack is resting on
them.
Figure 7: MXe Rack-mount Screw Placement