Programming instructions

263
Hardware Reference
Table 44: Embedded Analog Pager Connector Pinout
Pin Signal Virtual PLID
1 Common contact
2 Normally closed contact
3 Normally open contact
4 Page1 (Tip) 4 1 4 1
5 Page2 (Ring) 4 1 4 1
6 No connection
7 Not used
8 Not used
Note: The Paging port is an 8-pin RJ-45 connector on the rear panel of the MX controller.
The paging port has a tip/ring pair for audio and contact closures for zone control. The
normally closed contact opens when paging and the normally open contact closes when
paging. See “RJ-45 Pin Orientation” on page 261.
Table 45: Embedded Analog Amphenol Connector Pinout
Pin Color Code Analog Main Board Analog Option Board PLID
26/1 W/BL, BL/W ONS Ring/Tip 1 PFT #1 4-1-1-1
27/2 W/O, O/W ONS Ring/Tip 2 PFT #2 4-1-1-2
28/3 W/G, G/W ONS Ring/Tip 3 4-1-2-1
29/4 W/BR, BR/W ONS Ring/Tip 4 4-1-2-2
30/5 - 35/10 NOT USED
36/11 BK/BL, BL/BK LS Ring/Tip 1 PFT #1 4-1-1-3
37/12 BK/O, O/BK LS Ring/Tip 2 PFT #2 4-1-1-4
38/13 BK/G, G/BK LS Ring/Tip 3 4-1-1-5
39/14 BK/BR, BR/BK LS Ring/Tip 4 4-1-1-6
40/15 BK/S, S/BK LS Ring/Tip 5 4-1-1-7
41/16 Y/BL, BL/Y LS Ring/Tip 6 4-1-1-8
42/17 Y/O, O/Y LS Ring/Tip 7 4-1-2-3
43/18 Y/G, G/Y LS Ring/Tip 8 4-1-2-4
44/19 Y/BR, BR/Y LS Ring/Tip 9 4-1-2-5
45/20 Y/S, S/Y LS Ring/Tip 10 4-1-2-6
(Page 1 of 2)