Programming instructions

248
3300 ICP Technician’s Handbook
IP Phone Analyzer
The Mitel 3300 ICP IP Phone Analyzer is an application that collects
performance information from the IP devices on the network.
Requirements
Install the IP Phone Analyzer on a PC running Windows NT, Windows
2000, Windows XP, or Windows 98.
Installing the IP Phone Analyzer
To install the IP Phone analyzer:
1. In the System Administration Tool, program the IP address of the PC
to Option 131 for pre-Release 7.0 systems or to the ipa_srv tag in
Option 43 for Release 7.0 and later systems.
2. Insert the 3300 ICP software CD-ROM in the PC’s CD drive.
3. Open the CD’s Tools folder, then the Phone Analyzer folder.
4. Double-click Setup.exe. Follow the IP Phone Analyzer install prompts.
Launching the IP Phone Analyzer
• Open Mitel IP Phone Analyzer (Start/Programs).
Enabling Tool Analysis
To enable tool analysis from the IP Phone Analyzer Tool:
1. Select Commands, then Register Set.
2. Enter the IP address of the IP telephone.
To enable tool analysis from the IP telephone:
• Reboot the phone to add the IP address of the PC to the telephone.
The IP address appear on the IP Phone Analyzer Status View window.
Tip: The PC must be connected to the network via a Layer 2 switch port on
the controller.
Tip: For detailed information, refer to IP Phone Analyzer Online Help.