Programming instructions

246
3300 ICP Technician’s Handbook
Last Known CDP L2 Port MAC MAC address of the CDP Layer 2 switch
where the IP device was connected on first
registration or registration after a move.
- “Unknown” device is one that does not
support CDP with its current firmware
load. A ‘Reload’ of set firmware may
be required.
- “Not Supported” device indicates that
L2 switches do not support CDP.
Contact the L2 switch provider; an
upgrade may be required.
Last Known CDP Port Identifier Port number on the CDP Layer 2 switch
where the IP device was connected on first
registration or registration after a move.
Last Known CDP L2 IP Address IP address of the CDP Layer 2 switch where
the IP device was connected on first
registration or registration after a move.
State "In Service" or "Out of Service". This data
used by the system to determine whether
multiple in-service devices are connected
through the same Layer 2 MAC and Port.
Useful for identifying system configuration
issues.
Move Acknowledged
“Not applicable” indicates a device that
has not moved. This is the only editable
field. After you have updated the
Customer Emergency Services ID
(CESID) Assignment form, change this
field to Yes. Click Data Refresh to
remove the device from the list of Moved
devices.
Tip: Refer to the System Administration Tool online help for Device - Move
examples and explanation of field information.
Table 38: Device Connectivity Form Fields (continued)
Field name Description
(Page 3 of 3)