Programming instructions

228
3300 ICP Technician’s Handbook
Table 32: IP Phone Error Handling Displays
Message Description Phone Display
Note: Check the IP Parameters (TFTP address, netmask, gateway address), to
make sure that they are valid, before calling Mitel.
If TFTP fails, usually due to incorrect TFTP
Server or Gateway IP address, review IP
parameters and correct errors.
RTCS creat err <number>
BOOTING xx.xx.xx.xx
-------------------------
If add err <number>
BOOTING xx.xx.xx.x
-------------------------
RTCS Bind err <number>
BOOTING xx.xx.xx.x
The TFTP server sent an “I am busy” error
so the phone will delay and retry.
xx.xx.xx.xx
Waiting for TFTP
If the phone received a bad packet from the
TFTP server, audit the TFTP server
configuration and the network path.
xx.xx.xx.xx
TFTP Err: <number>
This error indicates that you must review
the IP parameters on the DHCP server or
manually entered for the phone.
xx.xx.xx.xx
TFTPerr: Packet send
Internal TFTP errors - contact Mitel
Technical Support.
xx.xx.xx.xx
TFTPerr: Sock create
------------------------
xx.xx.xx.xx
TFTPerr: Sock bind
------------------------
xx.xx.xx.xx
TFTPerr: Packet alloc