Programming instructions

174
3300 ICP Technician’s Handbook
Erasing the Registration PIN
1. Access the Configuration Menu (see page 171).
2. Press No until TOOLS AND FEATURES? appears, and then press
Yes. ERASE PIN? appears.
3. Press Yes, and then follow the prompts to erase the PIN and to store
the changes and reboot the phone.
4. To exit the current menu without a reboot:
- To return to the main menu, press Yes at EXIT MENU?
- To return to the default display, press Superkey.
Pinging IP Addresses
1. Access the Configuration Menu during the phone boot sequence.
2. Press No until TOOLS AND FEATURES? appears.
3. Press Yes, and then press No until PING TEST? appears.
4. Press Yes and then follow the prompts to conduct the PING test.
5. To exit, do one of the following:
- To return to the main menu, press Yes at EXIT MENU?.
- To return to the default display, press Superkey.
Conducting a DHCP Trace
There is a delay while the phone performs DHCP discovery. The result of
the trace displays the following information:
• Phone and Gateway IP addresses
• Subnet mask
• WINS, DNS, TFTP, ICP and Video servers
• DHCP server and Mitel IDs
• Lease
• T1 and T2
• VLAND ID and priority
• HTTP proxy
• IPA address.