Programming instructions

172
3300 ICP Technician’s Handbook
Viewing/Modifying Network Parameters
You can view and modify the following network parameters on the phone:
• Phone IP address (current and static)
• Gateway IP address (current and static)
• Subnet mask (current and static)
• Current controller IP address
• TUG1, TUG2, TUG3, and TUG4 IP addresses (current)
• TFTP server IP address (current)
• VLAN ID and priority (current and static)
• DSCP value
• IPA IP address (current and static)
• TUG IP address (static)
• TFTP SVC IP and port (static).
To view and modify network parameters:
1. Access the Configuration Menu (see page 171).
2. At NETWORK PARAMETERS?, press Yes. VIEW CURRENT
VALUES? appears.
3. Do one of the following:
- Press Yes, and then press the Up/Down volume keys to view each
setting. When you return to VIEW CURRENT VALUES?, press No.
VIEW STATIC VALUES? appears.
- Press No. VIEW STATIC VALUES? appears.
4. Do one of the following:
- Press Yes, and then press the Up/Down volume keys to view each
setting. When you return to VIEW STATIC VALUES?, press No.
MODIFY STATIC VALUES? appears.
- Press No. MODIFY STATIC VALUES? appears.
5. Do one of the following and then reboot the phone:
- Press Yes, and then press the Up/Down volume keys to scroll
through each setting. Use the keypad to modify parameter(s), and
then follow the prompts to store the changes and reboot the phone.