Programming instructions

7
Introduction
• IP Phone Analyzer collects performance information about the IP
devices connected to the 3300 ICP. You can use one PC to monitor
the debug and status information of IP phones (see page 248).
•OPS Manager enables you to control the maintenance and operation
of a network of elements. With OPS Manager, you can, for example,
manage a network telephone directory, schedule move, add, change,
and delete user operations, and integrate the network telephone
directory with a directory service database.
Application Management Center (AMC)
The online licensing process, managed by the Mitel Application
Management Centre (AMC) allows Solution Providers who have accounts
on the AMC to manage software licenses online. Each company is able to
supply customers instantly if new licenses are required. Refer to
“Requirements for AMC Connection” on page 23 for Software Installer
Tool and 3300 ICP system networking requirements.
Installation/Maintenance Computer
You need a Windows-based computer to program, maintain and
troubleshoot the 3300 ICP, and to install/upgrade 3300 ICP software.
Computer Recommendations
• Windows
®
NT 4.0, Windows 2000, or Windows XP
Computer Requirements
• Windows 98, Windows NT 4.0, Windows 2000, or Windows XP
• Network interface card (NIC)
• 525 MB free disk space (minimum)
• Internet Explorer 6.0 with the latest Service Pack and 128-bit
encryption
• VT100™ emulator program
• FTP server (can be installed with Microsoft
®
IIS or PWS, for example)
Tip: Windows 98 with PWS does NOT include an FTP server application,
and will not work for the software installation/upgrade process unless a
third-party server application is used.