Programming instructions

3300 ICP Technician’s Handbook

About the 3300 ICP

The 3300 ICP is a Voice over IP solution that delivers voice capabilities

and features to the enterprise. There are several system configurations:

the 100-user system; the MX with embedded analog, that can support 200

users; the CX and the CXi with embedded analog and embedded Layer2

switch for sites with an 8-64 line size; the MXe base with embedded analog

that can support 200 users before expansion; and the LX that can support

700 users (with 256 MB RTC memory) or 1400 users (with 512 MB RTC

memory from Release 6.0).

Programming Tools

The system includes a number of programming tools:

• Embedded System Management (ESM) consists of:

- System Administration Tool that provides a Web-based interface

that trained technicians use to program the system.

- Group Administration Tool that provides a Web-based interface

to enable administrators to make changes to user information.

- Desktop Tool that provides a Web-based interface to enable

display IP telephone users to program feature keys on their phone.

• Configuration Wizard, introduced with Release 7.0, allows you to

customize initial system programming. After you specify the system

setup, you can save the details for future use or apply the changes to

the 3300 ICP.

• ISDN Maintenance and Administration Tool (IMAT) provides the

programming interface for PRI and R2 protocols delivered via an NSU

or DSU. Embedded PRI via the Dual T1/E1 Framer is programmed

though the System Administration Tool.

• ICP Software Installer Tool expedites the distribution of 3300 ICP

software by eliminating a number of interactive steps (see page 69).

The tool restores saved databases and, from Release 7.0 UR1,

enables databases from legacy SX-2000

LIGHT, SX-2000

MicroLIGHT, 3200 ICP, and 3800 WAG systems to migrate to the

3300 ICP. The Software Installer Tool replaces the Configuration Tool.

• Configuration Tool restores saved databases and enables legacy

SX-2000