Programming instructions

4
3300 ICP Technician’s Handbook
Start Here Guide
What You Received
 Options sheet with password from Mitel OnLine (see page 11)
 3300 ICP Controller
 Hard drive
 System ID module or System i-Button
 Software CD-ROM
 NSU, ASU (optional)
 Set of feet, rack ears, and screws for each unit
 Review your purchase order for other, optional, components.
Installation Tools and Equipment
 Installation Planner (Appendix B on page 295)
 Typical Network Configurations (Appendix C on page 317)
 Computer for programming the 3300 ICP
 CAT 5 or better Cable with RJ-45 connector
 IP addresses for the controller, E2T, and IP telephones
 List of purchased options and password
 IMAT (not required if you have Embedded PRI)
 Phillips screwdrivers
 Static strap.