Programming instructions

90
3300 ICP Technician’s Handbook
Using IMAT
For more information, refer to the IMAT online help.
To log onto an IMAT computer:
1. Launch IMAT from the Start menu or the desktop (ignore any
message about username configuration error).
2. On the File menu, select Connect to Remote Site.
3. Click to select Ethernet Network Card in the Connection Medium
field.
To exit the IMAT application:
1. Save any open databases.
2. On the File menu, click Exit.
Connect a Windows 95/98 PC to the NSU via Dial-Up
By default, Windows does not support a direct cable connection. You must
add a device driver. Windows takes the information from a Mitel file and
creates the driver called NT Direct Connection.
To install a Direct Connection Device Driver (Windows 95/98):
1. On the Start menu, point to Settings, and then click Control Panel.
2. Double-click the Modems icon.
3. In the Modem Properties window, click Add.
4. In the Install New Modem screen, click Other.
5. Select Don't detect my modem, I will select from a list, then click
Next.
6. Click Have Disk.
7. Type c:\Program Files\Mitel\Imat in the Copy manufacturer's files
from field, then click OK.
8. In the Install from Disk window, click OK.
Tip: You can also connect the PC to the NSU via a modem (remote
connection). For more information, see the IMAT Online Help.
Tip: Refer to the IMAT online help for dial-up connection details when your
PC is running on Windows NT 4.0, Windows 2000 Professional, or
Windows XP without a NIC.