Installation Guide

7

2.3 SecurityFeatures 
The CW9166I‐MR,CW9164I‐MR features multiple options for physically securing the access point after
installation:


1. Securityscrew –The accessorykit includesscrews thatcan beusedtosecuretheaccess
point to
 themountplate.Engagingthesecurityscrewpreventsaccidentaldislodgingand
theft.


2. Kensingtonlock–Theaccesspointcontainsahardpointthatallowsittobesecuredtoany
nearby
 permanentstructureusingastandardKensingtonlock. 

2.4 EthernetPorts 
TheCW9166I‐MR,CW9164I‐MRfeaturesanEthernetRJ45portthataccepts802.3afpower(labeled
“PoE”).Thisportshould
 beusedforuplinktoyourWANconnection. 

2.5 PowerSourceOptions 
TheCW9166I‐MR,CW9164I‐MRaccesspointcanbepoweredusingeithertheMerakiACAdapteror
802.3afPoEInjector(bothsold
 separately)orathird‐party802.3afPoEswitch. 

2.6 FactoryResetButton 
If the button is pressed and held for at least five seconds and then released, the CW9166I‐MR,CW9164I‐
MR will reboot and be
 restoredto its original factory settings by deleting all configuration information
stored on theunit.
