Installation Guide

22

4.3 SecuretheCW9166I‐MR,CW9164I‐MR 
Depending on your mounting environment, you may want to secure the CW9166I‐MR,CW9164I‐MR to its mount
location. Your CW9166I‐MR,CW9164I‐MR

canbesecuredinseveralways.IftheCW9166I‐MR,CW9164I‐MRhasbeeninstalledusingthemountplate,it
canbesecuredviasecurity
 screw(TorxandPhilipsheadsecurityscrewsareincluded;chooseone),and/or
Kensingtonlock.Ifthemount

platewasnotused,theCW9166I‐MR,CW9164I‐MRcanstillbesecuredusingaKensingtonlock. 



4.3.1 Security Screw 
Installthesecurityscrewinthelowermountplatetab. 


4.3.2 KensingtonLock 
AttachaKensingtonlockcabletotheaccesspointatthehardpointonthesideofthedevice. 
Attachtheotherendofthecabletoasecurelocation,suchasapipeorbuildingfixture. 