User guide

Index
IN-6
Cisco Transport Manager Release 9.2 GateWay/CORBA User Guide and Programmer Manual
OL-20937-01
performance monitoring
disabling
3-210
enabling 3-211
retrieving threshold values on TPs or layer rate
measurement points
3-267
physical termination point names, requesting all 3-89
physical termination points
naming conventions
2-30
requesting all 3-88
retrieving
all supported PTP names by specific
equipment
3-71
that can carry protected traffic 3-277
used as subnetwork connection source 3-102
using to retrieve topological links 3-99
ping command 3-288
PM data
deleting file
3-270
requesting
all current
3-274
filtered 3-271
number of hours stored in CTM 3-274
probable cause mapping A-12
programming details 2-37
protection groups
creating in a managed element
3-283
discovering for a managed element 3-277
naming conventions 2-36
retrieving associated protection groups 3-287
retrieving the current status of 3-279
supported for the protection command (table) 3-281
protection manager interface 3-276
protection switch A-8
executing 3-280
provisioning
equipment holders
3-75
subnetwork connections 2-39
Q
QoS
templates
names, retrieving all top levels
3-38
naming conventions 2-37
retrieving all top levels 3-38
retrieving information 3-41
R
releasing maintenance commands 3-80
requesting
all managed element names
3-126
list of edge termination points 3-123
managed element
information
3-85
names, by associated subnetwork 3-126
physical termination point names 3-89
physical termination points 3-88
PM data
all current
3-274
filtered 3-271
subnetwork connections
by managed element
3-83
resolving
naming service-related issues using debugging
utilities
B-6
notification services A-2
resynchronizing the NMS from the EMS
using cases
C-1
retrieving
all supporting equipment names
3-72
associated protection groups 3-287
capabilities of the common interface 3-18
connection termination point names 3-94
connection termination point names in use 3-92
connection termination points 3-92
in use 3-90