User guide

A-62
Cisco Transport Manager Release 9.2 GateWay/CORBA User Guide and Programmer Manual
OL-20937-01
Appendix A Notifications, Fault Management, and Probable Cause Mapping
A.5.11 CTM GateWay/CORBA Mapping—ONS 15600 SONET
EQPT Equipment failure
EQPT Diagnostics failure
EQPT Equipment failure—high temperature
EQPT Invalid MAC address
UNIDENTIFIED Failure to switch to protection
UNIDENTIFIED Failure to switch to protection—path
UNIDENTIFIED Failure to switch to protection—ring
UNIDENTIFIED Failure to switch to protection—span
EQPT Fan failure
EQPT Partial fan failure—speed degradation
EQPT Partial fan failure—parts failure
EQPT Clock module frequency mismatch
UNIDENTIFIED OSPF hello fail
EQPT Laser bias current high
EQPT High laser temperature
UNIDENTIFIED Software download failed
UNIDENTIFIED Different software version
EQPT Synchronization equipment unavailable
EQPT Unprotected synchronization equipment
EQPT Unprotected matrix equipment
UNIDENTIFIED System upgrade in progress
EQPT Matrix equipment unavailable
UNIDENTIFIED Loopback—cross connect
UNIDENTIFIED Loopback facility
UNIDENTIFIED Loopback payload
UNIDENTIFIED Loopback
SECURITY_VIOLATION Security—invalid login (see audit trail)
SECURITY_VIOLATION Invalid login attempt threshold exceeded
UNIDENTIFIED Normal condition
UNIDENTIFIED Performance monitor threshold crossing alert
UNIDENTIFIED Duplicate node ID
EQPT Improper removal
UNIDENTIFIED Both ends of fiber provisioned as east
UNIDENTIFIED Far end of fiber is provisioned with different ring ID
UNIDENTIFIED Protection switch
EQPT Equipment power failure
Table A-27 CTM GateWay/CORBA Mapping for the ONS 15600 SONET (continued)
TMF Mapping NE Native Probable Cause