User guide

A-21
Cisco Transport Manager Release 9.2 GateWay/CORBA User Guide and Programmer Manual
OL-20937-01
Appendix A Notifications, Fault Management, and Probable Cause Mapping
A.5.3 CTM GateWay/CORBA Mapping—MGX 8880/8850/8830
FOP_APS APS alarms, APS revertive switch fail
FOP_APS APS alarms, APS manual switch fail
FOP_APS APS alarms, APS SD low switch fail
FOP_APS APS alarms, APS SD high switch fail
FOP_APS APS alarms, APS SF low switch fail
FOP_APS APS alarms, APS SF high switch fail
FOP_APS APS alarms, APS force switch fail
FOP_APS APS alarms, APS lockout switch fail
FOP_APS APS alarms, APS line status OK
Port Alarms: AXSM, MPSM, PXM1E
UNIDENTIFIED Port, not configured
UNIDENTIFIED Port, down/failure
UNIDENTIFIED Port, remote loopback
UNIDENTIFIED Port, signaling failure
UNIDENTIFIED Port, out of cell delineation
UNIDENTIFIED Port, lower layer down
RPM Port Alarms: RPM, RPM-XF
UNIDENTIFIED RPM port, down
UNIDENTIFIED RPM port, testing
UNIDENTIFIED RPM port, unknown
UNIDENTIFIED RPM port, lower layer down
SVC Port Alarms: AXSM, VXSM, RPM-XF, RPM
UNIDENTIFIED SVC port, failed
UNIDENTIFIED SVC port, inactive
UNIDENTIFIED SVC port, lower layer down
VISM Port Alarms: VISM
UNIDENTIFIED VISM port, failed
UNIDENTIFIED VISM port, degraded
UNIDENTIFIED VISM port, lower layer down
Aggregate Port Alarms: AXSM, MPSM, PXM1E RPM, RPM-XF
UNIDENTIFIED Aggregate port alarm; one or more connections on this port are
in primary failure
UNIDENTIFIED Aggregate port alarm; one or more connections on this port are
in secondary failure
UNIDENTIFIED Aggregate port alarm; one or more connections on this port are
incomplete
Connection Alarm: AXSM, MPSM, PXM1E, VXSM, VISM, RPM, RPM-XF
Table A-17 CTM GateWay/CORBA Mapping for the MGX 8880/8850/8830 (continued)
TMF Mapping NE Native Probable Cause