User guide

2-7
Cisco Transport Manager Release 9.2 GateWay/CORBA User Guide and Programmer Manual
OL-20937-01
Chapter 2 NE- and CTM-Specific Details
2.1.6 ONS 15327
information, including the actual name, and an AVC event is generated for the managed element name.
The NMS listens to the AVC event for the managed element name and invokes
managedElementManager::ManagedElementManager_I:: getManagedElement.
2.1.6 ONS 15327
See the Release Notes for Cisco Transport Manager Release 9.2 for the ONS 15327 software releases
that CTM R9.2 supports.
2.1.6.1 Slots
The ONS 15327 is a single-shelf NE with eight slots. The Mechanical Interface Card (MIC) A card must
occupy slot 8; the MIC B card must occupy slot 7. If an integrated Cross-Connect, Timing, and Control
(XTC) card is required, it must occupy slot 5 or slot 6.
2.1.6.2 Equipment
All of the cards in the ONS 15327 R5.0 and later display administration and service states. For earlier
software releases, these states are not applicable and CTM displays them as N/A.
2.1.6.2.1 Equipment Administration State
The attribute name is ACTUAL_EQUIPMENT_SERVICE_STATE and is displayed in
getAdditionalInfo for the equipment. Table 2-4 lists the attribute values for the administration state.
Table 2-5 and Table 2-6 list the attribute values for the service state.
Table 2-4 Equipment Administration State (ONS 15327)
Attribute Value Meaning
In Service Places the entity In Service.
Auto in Service Places the entity in Auto in Service. The circuit is out of service until it receives a valid signal
for the duration of the soak period, at which time the circuit state changes to In Service.
During the soak period, alarms and loopbacks are suppressed but traffic is carried.
Out of Service–Maintenance Removes the entity from service for maintenance. Alarms are no longer generated.
Out of Service Removes the entity from service and disables it. Alarms are no longer generated and traffic
is not carried.