User guide
2-5
Cisco Transport Manager Release 9.2 GateWay/CORBA User Guide and Programmer Manual
OL-20937-01
Chapter 2 NE- and CTM-Specific Details
2.1.4 ONS 15310 MA SDH
2.1.4 ONS 15310 MA SDH
See the Release Notes for Cisco Transport Manager Release 9.2 for the ONS 15310 MA SDH software
releases that CTM R9.2 supports.
2.1.4.1 Slots
The ONS 15310 MA SDH consists of two CTX slots and four Expansion (EXP) I/O slots.
2.1.4.2 Topological Links
All topological links are unidirectional or bidirectional for ONS 15310 MASDH NEs.
2.1.4.3 Cards
The ONS 15310 MA SDH supports the following cards:
• CTX2500
–
E1_21_E3_DS3_3_LINE_CARD—The electrical ports consist of 21 DS1 and 3 DS3 or EC1
ports.
–
E1_63_E3_DS3_3_LINE_CARD—The electrical ports consist of 63 DS1 and 3 DS3 or EC1
ports.
• ML-100T-8
• CE-100T-8
2.1.4.4 PTPs
All PTPs are bidirectional for the ONS 15310 MA SDH. The ports are always in channelized mode. PTPs
support In Service and Out of Service–Maintenance values for the service state attribute.
SNC provisioning on E1_21_DS3_3 and E1_63_E3_3 cards uses the following DS3/E3 ports:
• E1_21_DS3_3—Port numbers 22, 23, and 24.
• E1_63_E3_3—Port numbers 64, 65, and 66.
2.1.4.5 Auto Discovery
The ONS 15310 MA SDH supports automatic discovery of connected elements. CTM can connect to one
node and retrieve information about all connected nodes. The first time CTM connects to a node, it
retrieves only the IP address of the connected node; CTM does not retrieve the node name. However,
CTM must report this element to the users. Because the IP address is unique, CTM initializes the name
of the newly discovered element with the IP address. An object creation event is generated for this
managed element with the IP address as the name. Later, CTM connects to this element and retrieves all
information, including the actual name, and an AVC event is generated for the managed element name.
The NMS listens to the AVC event for the managed element name and invokes
managedElementManager::ManagedElementManager_I:: getManagedElement.