User guide

3-142
Cisco Transport Manager Release 9.2 GateWay/CORBA User Guide and Programmer Manual
OL-20937-01
Chapter 3 Using CTM GateWay/CORBA Interfaces
3.9.16 createAndActivateSNCFromUserLabel
• CrossConnectList_T ccInclusions
Not supported.
• ResourceList_T neTpInclusions
Supported. You must provide a list of managed element names or the PTP names at the endpoints of
the topological link. For complete manual routing, you must provide the list of all CTPs of the links
(OCH trail links, if any) to which the circuit must be routed.
FC LR_FC_100_1063M
LR_FC_200_2125M
LR_FC_400_4250M
LR_FC_800_8500M
LR_FC_1000_10518M
16=1Gb/s FC
15=2Gb/s FC
14=4Gb/s FC
86= 8Gb/s FC
13=10Gb/s FC
For WDM
OCHCC
SONET/SDH LR_DSR_OC3_STM1
LR_DSR_OC12_STM4
LR_DSR_OC48_STM16
LR_DSR_OC192_STM64
LR_DSR_OC768_and_STM256
7=OC 192
8=OC 48
9=OC 12
10= OC 3
33=OC 768
For WDM
OCHCC
PDH LR_T1_and_DS1_1_5M
LR_T3_and_DS3_45M
LR_E1_2M
LR_E3_34M
For WDM
OCHCC
Only on
ONS15454
SDH
Ethernet LR_Fast_Ethernet
LR_Gigabit_Ethernet
LR_Ten_Gigabit_Ethernet
LR_Forty_Gigabit_Ethernet
38=FE
11=10Gb/s E
12=1Gb/s E
89=40Gb/s E
1=2.5Gb/s FEC
2=2.5Gb/s No FEC
3=10 Gb/s FEC
4=10 Gb/s No FEC
5=Multirate
For WDM
OCHCC
OTU LR_Optical_Channel
LR_OCH_10_Gigabit_ITU
LR_OCH_40_Gigabit_ITU
35=OCH OTU2
36=OCHOTU3
For WDM
OCHCC
Other LR_PASS_TROUGH 29=Pass-through
6=Equipped not specific
Other
Layer Rate Category Layer Rates SNC Sizes Comments