User guide

3-124
Cisco Transport Manager Release 9.2 GateWay/CORBA User Guide and Programmer Manual
OL-20937-01
Chapter 3 Using CTM GateWay/CORBA Interfaces
3.9.2 getAllEdgePointNames
in unsigned long how_many,
out terminationPoint::TerminationPointList_T tpList,
out terminationPoint::TerminationPointIterator_I tpIt)
raises(globaldefs::ProcessingFailureException);
Description
This interface enables an NMS to request a list of edge termination points for the specified subnetwork
at one or more of the NMS-specified layers that are capable of containing CTPs that can be connected
at one or more of the NMS-specified connection layer rates.
CTM reports the PTPs that are not part of the topological link.
Parameters
For details about the TerminationPoint_T structure, see 3.6.3 getAllSupportedPTPs, page 3-63.
Throws
globaldefs::ProcessingFailureException
EXCPT_INTERNAL_ERROR - Raised in case of nonspecific EMS internal failure.
EXCPT_INVALID_INPUT - Raised when subnetName does not reference a multiLayerSubnetwork
object, or tpLayerRateList or connectionLayerRateList contain undefined values.
EXCPT_ENTITY_NOT_FOUND - Raised when subnetName references an object that does not exist.
EXCPT_TOO_MANY_OPEN_ITERATORS - Raised when the maximum number of iterators reaches 128.
Compliance
TMF-defined.
3.9.2 getAllEdgePointNames
Synopsis
getAllEdgePointNames
Name Type Input/Output Description
subnetName globaldefs::NamingAttributes_T In Name of the subnetwork.
tpLayerList transmissionParameters::LayerRate
List_T
In List of TP layer rates for which edge points are
retrieved. To be reported, an edge point must
contain at least one of the layer rates specified. If
the list is empty, edge points of all rates are
returned.
connectionLayerRate
List
transmissionParameters::LayerRate
List_T
In CTM does not use this parameter.
how_many unsigned long In Maximum number of edge points to return in the
first batch.
tpList terminationPoint::TerminationPoint
List_T
Out First batch of edge points.
tpIt terminationPoint::TerminationPoint
Iterator_I
Out Iterator to retrieve the remaining edge points.